Our factory built groundsheets offer greater protection and a cleaner floor for your X-Mid tent. The stock X-Mid floor is durable enough to last hundreds of nights without a groundsheet provided it is used with care on regular surfaces. A groundsheet is recommended for camping on harsher surfaces (e.g. rock, gravel), to provide a greater level of protection against unforeseen objects, and to keep your tent cleaner.
While many companies are content to sell you a piece of tyvek or a simple bit of fabric, we think groundsheets should be built to the same high quality standards as the tent you are using it with.
Our groundsheets are built using top of the line custom materials and construction methods. Unlike perhaps any other company, our groundsheets are fully double stitched, use double folded edges (to hide the raw fabric edges), have generous bartacking, and reinforce all of the connection points.
Unnecessary perhaps, but for a negligible weight difference we can make a groundsheet to be proud of.
The regular groundsheets fit the regular and Solid series tents.
Since the inner is removable in these tents, these groundsheets maximize versatility by having the same cords at the corners as the inner, so the tent can be used without the inner in fly + groundsheet mode. For greater simplicity you can remove the cords and re-tie the clips directly to the corners so they clip to the floor corners.
To install the groundsheet, slide it under the tent with the logo side up and clip it to the four corners of the fly.
The Pro groundsheets are intended for the Pro series tents.
Since the inner cannot be removed from the Pro tents, these groundsheets maximize simplicity and weight savings by clipping to the 4 corners of the floor.
To install the groundsheet, slide it under the tent with the logo side up and clip it to the four corners of the floor.
X-Mid 1 Groundsheet
3.7 oz / 105 g
X-Mid Pro 1 Groundsheet
3.3 oz / 95 g
X-Mid 2 Groundsheet
5.5 oz / 155 g
X-Mid Pro 2 Groundsheet
4.8 oz / 135 g
X-Mid Pro 2+ Groundsheet
5.1 oz / 146 g
20D polyester in Grey
Sil (bottom) and PEU (top) for durability and low slip.
3500 mm HH
Works with all years of X-Mid 1 and will work with the X-Mid Pro 1 if the lines are shortened (since the Pro fly is smaller) or removed (so that it clips the floor corners).
Works with the second generation X-Mid 2 (mid-2022 to present) in regular and Solid inner versions. Can be used with the 2020 - 2021 X-Mid 2 by lengthening the two longer lines by 5" each to fit the larger fly.
X-Mid Pro 1
Works with the X-Mid Pro 1 and regular X-Mid 1 (these share the same floor size).
X-Mid Pro 2
Works with the X-Mid Pro 2 only.
X-Mid Pro 2+
Works with the X-Mid Pro 2+ and X-Mid 2
The groundsheet fits the sleeping quarters like a glove. But,to get the most economical use out of it, you need to attach it to the floor of the sleeping quarters, which I did. Too much hassle to use it any other way.
Glad you're liking the groundsheet. We are moving towards having it clip to the floor corners instead of the fly corners to make it simpler (and then people can add cords if they want to pitch in fly + groundsheet mode). In the mean time, yes removing the cords so the clips are right at the corners does enable a simpler setup to the floor.
Easy to attach to the tent and you can leave it in place for the next use. Was hoping it would be a little thicker but adds protection on rocky ground.
All the way from the USA. Fab product for my fab tent.
Well made, light and perfect fit. No complaints here. I had a tyvek groundsheet but it was actually heavier than the Durston one. Perfect for my Xmid Pro 2